Spa Sparkle - Start-up package

- 1 Bottle of Spa Sparkle Water Care, 1L (32oz.)

- Measuring cupDispenser (for sanitizer tablet 1,2 inch)

-Spoon

- Microfibre cleaning cloth (70% polyester, 30% polyamide)

- 1 Bottle of Spa Sparkle Tube Cleaner, 250ml (8oz.)

- User guide

Procedure for adding Spa Sparkle Water Care to spa water

a. Adjust the pH value of your spa water to between 7.2 and 7.8.

b. Shake the bottle of Spa Sparkle Water Care well before using. Add the amount of Spa Sparkle Water Care indicated in the table to the water in your spa. Let pumps run at maximum speed for 2 minutes. Your spa can be used immediately after adding Spa Sparkle Water Care. Repeat step b once a week for optimal results!

c. Now add a sanitizer, for example chlorine granules or a 20 gram slowly soluble chlorine or bromine tablet. We recommend chlorine granules as a sanitizer.

d. If using chlorine granules, we recommend dissolving the granules in warm water before adding them to your spa water. After adding chlorine granules, let the pumps run at maximum speed for 2 minutes. Use the granules in the following situations as described below: - After each use of your spa, add 1 scoop (provided in package) of chlorine granules to spa water. - When not using the spa, add 1 scoop (provided in package) of chlorine granules (dissolved as specified above) to spa water at least once a week.

e. If using a 20 gram slow soluble chlorine or bromine tablet as a sanitizer, please follow the instructions below:

- Place the supplied dispenser containing a 20 gram slowly soluble chlorine or bromine tablet on the filter element (see illustration).

Ensure that the dispenser is below the water level and equipped with sanitizer at all times.